| Management Software
• GUI software for Windows 2000 / NT available
• Firmware embedded manager via RS-232C (platform
independent)
Controller
• Twelve UltraDMA 100 disk channels
• Power Intel i80303 64 bit RISC CPU
• Standard 128Mb cache memory on one SDRAM upgradable
up to 512Mb
• Firmware in Flash ROM for easy upgrades
• Automatic bad-sector reassignment
Host Interface
• Dual Ultra3 SCSI or 2Gb Fibre host channels
• Transfer rate up to 160Mbps/Channel with Ultra3
• Transfer rate up to 2Gb/sec per loop with Fibre
Electrical
AC Input Power
Voltage: 110/230VAC ± 15%
Frequency: 46 to 63Hz
Protection: 10A/250V fuse
Efficiency: PFC function
DC Output Power
(Two units, load-sharing)
Continuous: 300W each, 600W total
Environmental
Temperature
Operating: 10 to 35° C
Storage: -40 to 60° C
Humidity
20 to 80%, non-condensing
Altitude
Operating: 0 to 10,000 feet
Storage: 0 to 30,000 feet
Physical
Installation
Tower or Rackmount configurations available
Dimensions
RM112: 17" (w/o handle) 19"w (w/Handle), 19.5"d
x 7"h
NS-TR112: 8"(w/o Stand) 9.5"w (w/Stand) 20"d
x 18.5"h
Weight
RM112: 55 Lbs (w/o disk drives)
NS-TR112: 66 Lbs (w/o Disk Drives)
Configuration
Drive Trays
Eight 3.5 x 1 inch low profile drive trays (supports
up to ATA 133 HDDs)
Power Supplies
Dual 300W Power Supplies with PFC
Raid Controller
Fixed mount
Host and Communication
Ultra3 Host
Two standard 68 pin connections
Fibre Host
Two DB-9
Terminal
One RS232
Modem One
RS232
Cooling
• Three fan modules provide front to rear cooling
• Dual fans within individual Power Supplies
• All-metal construction with aluminum drive trays
Access
Peripherals
Fast-disconnect trays - Hot-Swappable
Power
Supplies
Mounted on rear panel, secured by captive screws - Hot-Swappable
Fans Mounted
on rear panel, secured by captive screws - Hot-Swappable
Cabling
Through easy to remove top cover, secured by captive
screws
Fault Indicators
Drive Power
Amber LED - access, Red LED - error, green LED - online
Power Supplies
Red LED on front of enclosure and audible alarm, LEDs
on each power supply module identifying specific failed
power supply
Fans LEDs
on front panel and audible alarm
Additional Options
• Tower or Rackmount configurations
• OEM logo silkscreening
• Local/remote critical component monitor - Power
Supplies, fans, environmental temperature
Download the printable
PDF!
Please contact our sales team at info@networksynthesis.com
if you want to find out more! |
