NS-MUE 005 ATX

Products
RAID
Enterprise
NAS
SAN
Backup Products
Controllers
JBOD
Accessories
Full product list
Reseller Forms

Products > RAID solutions > Chassis only

All PDF forms require the free Adobe Acrobat Reader.

12 Half-Height Device Bay, 2 or 4 Power Supplies, 7-U PC Server/RAID Universal Enclosure

With support for
• SCSI narrow/ultra-wide single ended/ultra-wide differential
• SCSI Ultra II LVD
• SCSI Ultra III LVD
• Fibre
• Storage Area Networks (SAN)

Overview
• Attractive Rackmount enclosure designed for all RAID system configurations
• Designed to house a processor board, three 5.25 inch half-height bootable devices, and up to nine 5.25 inch RAID array drive trays (3.5 inch drives)
• Processor board mounting is designed to accommodate either full / baby ATX motherboards or passive Trenton backplanes
• Three 5.25 inch upper bays can be used for any 5.25 inch half or full-height devices such as: controllers, optical disk drives, tape drives, hard disk drives, etc.-uniformly or in any selected combination
• Nine 5.25 inch RAID array bays can be used for any 5.25 inch half or full-height devices such as: controllers, optical disks drives, tape drives, hard disk drives, etc.-uniformly or in any selected combination
• Two 300W, hot-swappable, redundant, load sharing power supplies (optional two 400w power supplies, or four 230W power supplies available)
• Two hot-swappable, redundant, dual fan assemblies (54CFM each) and a fixed dual fan assembly in the front (102CFM) provide ample front-to-rear cooling - fully certified for 10k RPM hard disk drives
• Quick-disconnect trays and connectors allow quick and easy hot-swappable replacement of drives, power supplies and fans while system remains online
• System status visual indicators and audible alarms for individual components - drive trays, power supplies and fans
• Enclosure security provided by key-locked front door allowing at-a-glance monitoring of system status indicators through front window
• Quality all-metal construction and agency approved components ensure compliance with UL, CSA, TUV, FCC, and RETMA agency standards
• Easy access design allows for quick and easy replacement of all interior and exterior components
• Low Voltage Differential or Fiber host ports available
• Storage Area Network (SAN) ready
• Quality product made in the U.S.A. - three year warranty

Electrical
AC Input Power
Voltage 115/230VAC ± 15% (Switch selectable)
Frequency 47 to 63Hz
Protection 10A/250V fuse
DC Output Power
(Two units - load sharing)
Continuous: 300W each, 600W total
(400W Each, 800W total optional)
(230W Each, 920W total optional)
+5VDC: 25A each, 50A total
-5VDC :.5A each, 1.0A total
+12VDC: 14A each, 28A total
-12VDC: 0.5A each, 1.0A total
+3.3VDC: 10A each, 20A total

Environmental
Temperature
Operating: 0 to 50° C
Storage: -25 to 85° C
Humidity
0 to 95%, non-condensing
Altitude
Operating: 0 to 10,000 feet
Storage: 0 to 30,000 feet

Physical
Installation
19in. RETMA Rackmount sides
Dimensions

19in. w x 21.12in. d x 12.25in. h
Weight
70Lbs unpopulated

Configuration
Drive Trays Supports up to twelve 5.25 inch half-height devices (3.5 inch drives)
Power Supplies Two 300W power supplies (two 400W power supplies optional)
RAID Controllers Supports RAID Controllers (5.25in. full or half-height form factor)
Mother Board Full or baby ATX

Connector Locations
Standard Four SCSI-II/III, two DB-9
Options Available

Cooling
• Two 12VDC, 54CFM rear mounted hot swap fan modules
• Two 12VDC, 51CFM front fixed mounted fans
• Self-contained fan within individual power supplies
• Self-contained fan within individual drive trays
• All-metal construction provides superior heat dissipation

Access
Peripherals Keylock protected fast-disconnect trays - hot-swappable
Power Supplies Mounted on rear panel, secured by captive screws - hot-swappable
Fans Mounted on rear panel, secured by captive screws - hot-swappable front fixed mounted - through top cover
Cabling Through easy to remove top cover, secured by captive screws

Fault Indicators
Drive Power Green LED on drive tray
Power Supplies Green LED on front of enclosure and audible alarm, two green LEDs on rear panel identifying specific failed power supply
Fans Green LED on front panel and audible alarm

Activity Indicators
Drives Amber LED on front of each drive tray

Additional Options
• RJ45 connector
• Logo silkscreening
• Custom painting
• Beige, black or white (custom colors available)

Download the printable PDF

back to top

Please contact our sales team at info@networksynthesis.com if you want to find out more!