Network Synthesis - Product Data Sheet: NS-RM 241

NS-RM 241

Products

RAID

Reseller Forms

All PDF forms require the free Adobe Acrobat Reader.

9 Half-Height Device Bay (or 4 Full-Height, 1 Half-Height),
Dual Power Supply, Low Profile 4-U RAID Rackmount Enclosure
Fault Detection • Hot-Swappable Maintenance • uninterrupted Operation

Printable PDF

With support for
• SCSI Narrow/Ultra-Wide Single Ended/Ultra-Wide differential
• SCSI Ultra II LVD
• SCSI Ultra lll LVD
• Fibre
• Storage Area Networks (SAN)

Overview
• Attractive Rackmount designed for RAID 0-5 system configurations (pictured with optional bezel door)
• Two Hot-Swappable, redundant, load sharing 300w (each) Power Supplies
• Two Hot-Swappable, redundant fans provide front-to-rear cooling
• Supports full or half-height RAID or tape array controllers or software implemented RAID
• Supports hard drives, cd drives, optical disks and tape drives - uniformly or in selected combinations
• 19 inch Rackmount enclosure meets RETMA standards - includes slides (desktop configuration available)
• uninterrupted disk operation for continual data availability
Quick-disconnect trays and connectors allow for quick and easy Hot-Swappable replacement of drives, Power Supplies and fans while system remains online
• Highly versatile layout design allows for mounting of up to nine 5.25 inch half-height devices or four 5.25 inch full-height devices (3.5 inch drives)
• Built-in system status visual indicators and audible alarms are provided for individual components - drive trays, Power Supplies and fans
• Enclosure security provided by keylocked front door that also allows at-a-glance monitoring of system status indicators through front window
• Drive security provided by individual keylocked drive trays
Quality all-metal construction and agency approved components ensure compliance with UL, CSA, TUV and FCC standards
• Flexibility in configuration options including choice of drive trays, a variety of cables and connectors, and custom painting to match any product, system or facility decor
• Easy access design allows for quick and easy replacement of all interior and exterior components
• Quality product made in the U.S.A. - three year warranty

Electrical
AC Input Power
Voltage: 115/230VAC ± 15% (auto sensing)
Frequency: 46 to 63Hz
Protection: 5A/250V fuse
DC Output Power
(Two units, load-sharing)
Continuous: 300W each, 600W total
+5VDC: 25A each, 50A total
-5VDC: .5A each, 1.0A total
+12VDC: 14A each, 28A total
-12VDC: 0.5A each, 1.0A total

Environmental
Temperature
Operating: 0 to 50° C
Storage: -25 to 85° C
Humidity
0 to 95%, non-condensing
Altitude
Operating: 0 to 10,000 feet
Storage: 0 to 30,000 feet

Physical
Installation
19in. RETMA Rackmount sides (desktop configuration available)
Dimensions
19in. w x 22in. d x 7in. h
Weight
50Lbs unpopulated

Configuration
Trays Highly versatile layout design allows for mounting of up to nine 5.25 inch half-height devices or four 5.25 inch full height devices (3.5inch drives)
Power Supplies Two 120W Power Supplies
RAID Controller Supports two RAID controllers (5.25in.full or half-height form factor)

Connector Locations
Standard Four Centronics, Twelve SCSI II/III, two DB-9
Options Available

Cooling
• Two 12VDC, 51CFM fan assemblies provide front to rear cooling
• Self-contained fan within individual Power Supplies
• Self-contained fan within individual drive trays
• All-metal construction provides superior heat dissipation

Access
Peripherals Keylock protected fast-disconnect trays - Hot-Swappable
Power Supplies Mounted on rear panel, secured by captive screws - Hot-Swappable
Fans Mounted on rear panel, secured by captive screws - Hot-Swappable
Cabling Through easy to remove top cover, secured by captive screws

Activity Indicators
Drives Amber LED on front of each drive tray

Additional Options
• OEM logo silkscreening
• Rackmount slide kit
• Tabletop conversion kit
• RJ45 connector
• Telco DC -48V power supply

Download the printable PDF

Please contact our sales team at info@networksynthesis.com if you want to find out more!